7075 Aerospace Extrusions
7075-T6511 USA Made Extruded Shapes and Flat Bar
In addition to our extruded shapes in 7075, Aircraft Extrusion is now selling 7075-T6511 Flat bar up to 12inch wide produced in the USA.
The principle alloying element in 7075 extrusion is Zinc. 7075 is one of the highest strength aluminum alloys available and is used in the structure of the aircraft wher the stress is high. It has a high strength-to-weight ratio. It can be formed in the annealed condition and can be heat treated 7075 to multiple tempers including 7075-0, 7075-T6511, 7075-T73511 and 7075-T76511.
Aircraft Extrusion Company is one of the few companies that stocks DFAR 7075-T6511 in flats upto 12" width
Coming October 2021. 7075-T6511 Domestic Flat Bars
Order Now!
Domestic 7075-T6511 AMS-QQ-A-200/11 Flat Bars
How we can help
Our prints go back to the 1930's. We can make as little as 12ft, and if it's a relatively common shape we will not charge for the die. In addition to the extruded shape we go beyond, offering:
- Phone: (888) 530 7075
- E-Mail: sales@aircraftextrusion.com
Mechanical Properties for 7075-T6511
Unlike bar and plate, aerospace profiles tensile and yield vary slightly depending on the wall thickness. Most sites provide limited information. The table below is taken from the 2017 Aluminum Standards and Data
Availability
Each alloy has a different temper or hardness. This temper translates into tensile strength and yield strength. Tensile strength is the point at which when the extrusion is pulled apart will snap. Yield strength is the point at which the extrusion is bent beyond its limits.
Where to buy 7075 Extruded shapes
Aircraft Extrusion Co stocks aluminum extrusions in 2024, 6061 and 7075. With over 20,000 shapes available in solid and hollow. We provide support to machine shops, OEM and support AOG service to airlines, third party maintenace fasilities worldwide.
| Alloy-Temper | Specification | Tensile Strength | Yield Strength | Elongation |
|---|---|---|---|---|
| 7075-0 | AMS-QQ-A-200/11 | 33,000 psi min | 15,0000 psi min | 16% |
| 7075-T6511 | AMS-QQ-A-200/11 | 83,000 psi min | 73,0000 psi min | 11 % |
7075 Extrusion Catalog
Looking for the old Tiernay Metals catalog? This section provides access to our online catalog for both casual and registered users of this website. The usage of the catalog is subject to the standard Terms of Use contained in this website. If you would like pricing or a copy of the digital ctalalog, send us an email to sales@aircraftextrusion.com